Cub Cadet SC2400 Manual De Usuario

■ Checking the Wheel Bolt Tightening Torque

Avoid injury:
●To prevent possible roll-over of the tractor, 

Before starting day's operation, check tightening 
torque of each of the tire wheel bolts and, if 
necessary, retighten to the specified torque.
Check the tightening torque after the first 5, 15 and 
50 hours and thereafter every 50 hours of operation. 
If necessary, retighten to the specified torque.
For the specified torque, refer to the following table.

■ Checking the Inflation Pressure

●ALWAYS keep the tires inflated to the correct 

Adjust the front and rear tires to the standard pressure. 
Check the tires for fissures and any other damages.
Before loader work, make sure to check the tire 
pressure and, if necessary, inflate the tire(s) to the 
recommended pressure.

Front wheel bolt (ft•lb (N•m))

52 - 59 (70 - 80)

Rear wheel bolt (ft•lb (N•m))

52 - 59 (70 - 80)

Tire size

Inflation pressure

(psi(kgf/cm

2

))

Inflation pressure when an implement such as the 

front loader has been attached to the front of the 

machine (psi(kgf/cm

2

))

Front 18 × 8.50 - 10

20 (1.4)

22 (1.5)

Rear 26 × 12.00 - 12

20 (1.4)

22 (1.5)

3130210