Cub Cadet Z-Force S Manual De Usuario

Remove the mower deck from the tractor as follows:
1. 

Move the tractor to a level surface, disengage the PTO, stop 

the engine, and set the parking brake.

2. 

Place the deck lift pedal in the lowest mowing position and 

replace the lock pin in front of pedal in the deck height 

bracket and secure by locking the lock pin. See Fig. 7-3.

3. 

Using a 1⁄2” drive in the idler pulley bracket, turn the wrench 

towards the back of the tractor and slide the belt off the 

PTO pulley. See Fig. 7-4.

4. 

Pull the cotter pins out of the four deck lift adjustment 

brackets. See Fig. 7-5.

The deck lift helper springs will cause 

the deck lift pedal to slam to the highest position if 

the click pin is not in front of the pedal.

5. 

Slide the links off the pins.
NOTE: It may be easier to place the deck lift pedal in 

the transport position when sliding the deck out from 

underneath the tractor.

6. 

Jack up the rear-end of the tractor using the rear bumper.

7. 

Slide the deck out from underneath the tractor to the right 

side.