Dixon ZTR 44/968999538 Manual De Usuario
CONTROLS
21
15
STOP
P
U
SH
TO RES
ET
THROTTL
BLADE
DRIVE
DRIVE
CHOKE
15
STOP
P
U
SH
TO RES
ET
BLADE
DRIVE
DRIVE
—
Fig. 4
—
BLADE DRIVE
•
Located on the operator’s right.
•
To engage the mower blade, pull the knob to the ON
position.
position.
•
To disengage mower blade, push the knob to OFF
position.
position.
THROTTLE CONTROL LEVER
•
Located on control panel to
operator’s right.
operator’s right.
•
Throttle control for engine
speed.
speed.
•
Throttle control should be set
to MAXIMUM or wide open
setting to insure adequate
cooling of the engine and to
maintain mower deck blade
speed while mowing.
to MAXIMUM or wide open
setting to insure adequate
cooling of the engine and to
maintain mower deck blade
speed while mowing.
CHOKE CONTROL
•
Choke for engine starting. On the 36"
and 42" models, the choke is
combined with the throttle. See Fig. 3.
The 44" has a separate choke cable.
See Fig 4.
and 42" models, the choke is
combined with the throttle. See Fig. 3.
The 44" has a separate choke cable.
See Fig 4.
CIRCUIT BREAKER
•
Protection of the electrical system is
by (1) 15 amp circuit breaker
by (1) 15 amp circuit breaker
•
If circuit breaker trips, push button
(lower left side of control panel ) to
reset.
(lower left side of control panel ) to
reset.
•
If this condition repeats, consult dealer
for inspection and repair
for inspection and repair
—
Fig. 3
—
Maximum
Throttle
Setting
Throttle
Setting
Choke
Position
Position