Cal Spas LTR20051000 Manual De Usuario

Page 4 

2005 Spa Owner's Manual 

8/1/2005

 

F2 = Two hours of filtration every 12 hours. This setting is for occasional spa usage only.  
F4 = Four hours of filtration every 12 hours. This setting is for light spa usage. (Up to four hours of usage a 
week)  
F6 = Six hours of filtration every 12 hours. This setting is for normal spa usage. (Up to six hours of usage a 
week) 
F8 = Eight hours of filtration every 12 hours. This setting is for heavy spa usage. (Up to eight hours of usage a 
week) 
FC = 24 hour filtration.  This setting is for spa usage that exceeds twelve hours a week. 
NOTE: F8 and FC filtration settings are only to be used with spas equipped with the Spa Cal™ filtration pump.  

These settings can cause conventional two speed pump systems to raise the water temperature well 
above the set temperature.  

2300 Equipment: 
Press either UP or DOWN followed by either the JETS 1 or JETS 2. Each additional press of the UP or DOWN 
button will increase or decrease the filtration time.  

5000 Equipment: 
Press the TEMP button followed by the JETS button. Each additional press of the TEMP button will increase 
the filtration time. 

9800 Equipment: 
Press TIME followed by MODE /PROG and use the UP and DOWN buttons to set time of day and filter cycles. 

Start-up: 
1.  Add 3 oz. of “Iron Out” or 16 oz. of “Metal Protector”. 
2.  Add 2 oz. of sodium bromide. 
3.  Add 2 oz. of “Oxidizer Shock”. 
4.  Add 3 to 4 Bromine tablets to a mostly closed floater.  
NOTE: Do not place bromine tablets in the skimmer basket. 

Weekly 
1.  Bromine: Acceptable range without a Cal Zone™ Ozonator is between 3 to 5 

a. 

Bromine: Acceptable range with a Cal Zone™ Ozonator is between 1 to 3. 

b. 

Chlorine: Acceptable range without a Cal Zone™ Ozonator is between 3 to 5. 

c. 

Chlorine: Acceptable range with a Cal Zone™ Ozonator is between 1 to 3.