Cal Spas Spa Surrounds Manual De Usuario

2009 Spa Surrounds

LTR20091033, Rev. A

1

Whether you assemble your surround package yourself or hire someone to do it, your new surround package 

needs to be assembled in a specific order. Our Cal Enclosures professionals have determined through their 

experience that this is the easiest way to assemble your surround package.

Utility knife 

25’ tape measure 

Cordless drill 

100’ extension cord 

Electric drill 

Phillips-head drill tips   

1/8” pilot hole drill bit 

9/16” socket 

Slotted-head drill tips   

 

Sandpaper (various grades) 

Redwood stain 

Wood putty 

Gray wash stain 

Rags 

1/2” ratchet and impact drill 

1/2” carbide drill bit (masonry bit)

Stand the legs up at 30” apart. Place the upper step on top of the upper section of the step.

1. 

To attach the step, screw in 4 screws (2 at each rear corner): 1 into the step leg and 1 into the step itself.

2. 

Place the lower step on the lower section of the step.

3. 

To attach the step, screw in 4 screws (2 on each on the outside of the step). Use the toe-in method on both 

4. 

sides, as shown.