Jacuzzi J - 400 Manual De Usuario

Page 81

1.   Power On and Off
 

Press power button (1) once to turn on stereo system. Press a sec-
ond time to turn off.

2.   adjusting Volume
 

Press VOL Up/Down button (3) to increase or decrease volume. Current 
volume setting is briefly displayed (0 to 45).

3.   mute
 

In Radio or AUX mode, press mute button (7) once to mute audio 

output (“MUTE” appears on display). To restore audio output, press 

button (7) a second time, or press volume up or down button. In 

CDP, USB, NAND and iPod mode, press button (7) to pause play-
back. Press again to resume playback.

4.   Program selection
 

Press MODE button (4) to cycle through available program sources 

as follows: Radio --> CDP --> USB --> NAND --> IPOD --> AUX --> 

Radio. If a CD or iPod is unavailable, that source will not appear on 
the display (17).

5.   adjusting bass level
 

Press EQ button (5) repeatedly until display reads “BASS”. Press 

VOL Up/Down button (3) to choose desired setting. A display of 

“BASS 0” indicates center, -1 to -7 indicates bass cut, and +1 to +7 

indicates bass boost. 

note: Unit returns to volume mode if volume control is not operated for 3 

seconds.

6.   adjusting Treble level
 

Press EQ button (5) repeatedly until display reads “TREBLE.” Press 

VOL Up/Down button (3) to choose desired setting. A display of 

“TREBLE 0” indicates center, -1 to -7 indicates treble cut, +1 to +7 

indicates treble boost. 

note: Unit returns to volume mode if volume control is not operated for 3 
seconds.

7.   adjusting balance level
 

Press EQ button (5) repeatedly until display reads “BALANCE.” 

Press VOL Up/Down button (3) to choose desired setting. A display 

of “BALANCE R-L” indicates center, L01 to 15 indicates left balance, 
R01 to 15 indicates right balance. 

note: Unit returns to volume mode if volume control is not operated for 3 
seconds.