Jacuzzi J - 400 Manual De Usuario

Page 89

1.   Connecting Your mP3 Player

A.  Plug in any MP3 player’s 

headphone output jack 

with supplied cable into the 

auxiliary port (11) using the 

supplied audio RCA cable. 

Close stereo compartment 

during use to prevent 

moisture from entering the 

compartment.

2.  setting up The mP3 

 

A.  Select preferred song/album/

playlist prior to plugging in 

MP3 player and start playback.

B.  Press “Mode Button” on stereo receiver until the LCD display 

reads “auX”.

note: All external MP3 player playback operations are performed solely 

by the MP3 Player with the exception of volume control and “Mode 

Button” selector, which can be controlled via wireless remote or on the 

stereo receiver.

warnInG: rIsK OF eleCTrICal sHOCK HaZarD 

eXIsTs anD eQuIPmenT DamaGe! Never connect, dis-

connect or operate external MP3 player while hands are wet 

or while sitting or standing partially or fully immersed in water!

19.9  J-1000 audio system stereo Troubleshooting
1.   unit will not turn-on
 

Make sure spa power is turned on, then 

check both harness fuses on side of unit 

making sure they are the proper ratings:

Yellow memory B+ line (10A fuse).

• 

When faced with a malfunction during 

• 

operation, push BND button (8) and Eject 

button (13) at the same time to reset 

software.

With spa power off, use a paperclip to 

• 

press the reset button located besides the USB Docking Station (10) 

to do a hardware reset.

note: It will be necessary to re-enter the radio preset memories and 

other personal settings after performing a reset. After resetting player, 
always ensure all functions are operation correctly.

USB