Black Box MPSH16-D20-120V Manual De Usuario

OUTLET MANAGED PDU

120

To configure the Invalid Access Lockout Alarm, you must access the Outlet Managed

PDU command mode using a password that permits Administrator Level commands.

The Invalid Access Lockout alarm configuration menu offers the following

parameters:

• Trigger Enable: Enables/Disables the trigger for this alarm. When

Disabled, this alarm will be suppressed. (Default = On.)

Note:

To cancel an alarm without unlocking the port, simply toggle the
Trigger Enable parameter Off and then back On again.

• Resend Delay: Determines how long the Outlet Managed PDU will wait to

resend an email message generated by this alarm, when the initial attempt to

send the notification was unsuccessful. (Default = 60 Minutes.)

• Notify Upon Clear: When this item is enabled, the Outlet Managed PDU

will send additional notification when the situation that caused the alarm has

been corrected. For example, when Notify Upon Clear is enabled, the Outlet

Managed PDU will send initial notification when it detects that an Invalid

Access Lockout has occurred, and then send a second notification when it

determines that the port has been unlocked. (Default = On.)

• Email Message: Enables/Disables email notification for this alarm.

(Default = On.)

Note:

The Email Message parameter offers four different options: On, Off,
On (Copy to All Triggers) or Off (Copy to All Triggers). If either of
the "Copy to All Triggers" options is selected, then email notification
for all other alarms will be switched On or Off as indicated by this
parameter. For example, If "Off (Copy to All Triggers)" is selected,
then Email notification will be disabled for all other alarms too.