Black Box MPSH16-D20-120V Manual De Usuario
CHAPTER 5: Configuration
87
•
WTI-Group-Access - Determines which plug group(s) the user will be
allowed to access. The argument for this command includes a character for
each, defined plug group. The first character in the string is used to represent
the first plug group defined, and the last character in the string represents the
last plug group defined. The following options are available for each
plug group:
0 = Off (Deny Access)
1 = On (Allow Access)
For example, to allow access to the first three defined plug groups out of a total
of six defined plug groups, the command line would be:
WTI-Group-Access="111000"
Example:
The following command could be used to set the command access level to "User",
allow access to Serial Ports 1, 3, 5 and 7 and Plugs 1 and 2, and also allow access to
the first two of five defined plug groups:
tom Auth-Type:=Local, User-Password=="tom1"
tom Auth-Type:=Local, User-Password=="tom1"
Login-Service=Telnet,
Login-TCP-Port=Telnet,
User-Name="HARRY-tom",
WTI-Super="1",
WTI-Plug-Access="11000000",
WTI-Group-Access="11000",