Kärcher K 1.302 Manual De Usuario

• Water hose must be at least 3/4 inch in

diameter.

• Flow rate of water supply must not fall

below 2.5 GPM (gallons per minute).

• Flow rate can be determined by running the

water for one minute into an empty“ 5-
gallon container.

Pull out the locking slide from
the right side of the trigger
gun handle.

Insert the small end of the
high pressure hose into place.

IMPORTANT PRECAUTIONS – continued

• The water supply temperature must not

exceed 104°F/40°C.

• Never use the pressure washer to draw in

water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.

• Always prevent debris from being drawn

into the unit by using a clean water source.

Push the locking slide back into
the trigger gun to lock the hose
in position.

Step 4
Connect the detergent suction
tube to the pressure washer.