DeVillbiss Air Power Company A17913 Manual De Usuario

15 - ENG

A17913

If the nozzle becomes clogged with foreign matter, such as dirt, excessive 
pressure may develop. If the nozzle becomes partially clogged or restricted, the 
pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit 
supplied and the following instructions:

1.  Place the ON/OFF switch in the OFF position and turn off the water supply.
2.  Unplug unit from power source

3.  Pull trigger on gun handle to relieve any water pressure.
4.  Disconnect the wand from the gun.

nozzle using the nozzle cleaner provided or a straightened paper 

clip. Insert into the nozzle end and work back and forth until ob struc tion is 
re moved.

6.  Direct water supply into nozzle end to backflush loosened particles for 30 

seconds.

8.  Reassemble the nozzle to the wand. Tighten securely to prevent leaks.
9.  Reconnect wand to gun and turn on water supply.
10.  Start pressure washer and place wand into high pressure setting to test.

Recommended accessories for use with your pressure washer are available 
for purchase from your local retailer or authorized service center. If you need 
assistance in locating any accessory for your tool, please call 

 or 

visit our website 

.

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment 
should be performed by an Authorized Warranty Service Center. Always use identical 
replacement parts. For the location of the nearest Authorized Warranty Service 
Center call 1-800-888-2468 or visit our website www. excellpressurewasher.com.