John Deere HR-2500GH Manual De Usuario
AC-Series Operator’s Manual-E/F
CheCk engine Oil
NOTE: All washers are shipped with engine oil. Check proper level.
. Place unit on level surface.
2. Remove oil filler cap/dipstick (A) and wipe it clean.
3. Insert filler cap/dipstick into oil filler neck, but DO NOT screw it in.
4. Remove dipstick. Proper oil level is at midpoint of dipstick (A). Add oil if necessary to bring oil level to top of
2. Remove oil filler cap/dipstick (A) and wipe it clean.
3. Insert filler cap/dipstick into oil filler neck, but DO NOT screw it in.
4. Remove dipstick. Proper oil level is at midpoint of dipstick (A). Add oil if necessary to bring oil level to top of
threads (B).
5. Install and tighten cap.
P
05-0
07
Preparing the Washer
gasOline engine Oil
Use oil viscosity based on the expected air temperature
range during the period between oil changes.
John Deere TURF-GARD
John Deere TURF-GARD
TM
is preferred. Also
recommended is John Deere PLUS-4
®
.
Other oils may be used if they meet one or more of the
following:
•API Service Classification SH
•API Service Classification SG
•CCMC Specification G4
•CCMC Specification G5
•API Service Classification SH
•API Service Classification SG
•CCMC Specification G4
•CCMC Specification G5
DWG
-
0
99
R
0
-40°f
-22°f
-4°f
14°f
32°f
50°f
68°f
86°f
104°f
122°f
50°C
40°C
30°C
20°C
10°C
0°C
-10°C
-20°C
-30°C
-40°C
sae 10W
-40
sae 10W
-30
sae 5W
-30
a
b
P
04-0
07