John Deere HR-2500GH Manual De Usuario

AC-Series Operator’s Manual-E/F

PuMP Oil

This pump does not require periodic changing of the oil. It

uses a high grade synthetic oil which will last for the

life of the pump.

P07-0

Preparing the Washer

COnneCT hOses and PriMe PuMP

IMPORTANT: Be sure that inlet water screen (C) is clean and in

place before connecting water supply hose to

washers. The water pump and valves could

be damaged from contaminants.

NOTE: Filling supply hose with water before attaching to pump

will greatly reduce priming time.

. Prime water supply hose. Shut off water.
. Connect water supply hose to washer inlet (B). Be sure

water supply and hose meet specifications. Do not turn

water on at this time.

CauTiOn: Check pressure rating printed on the

hose. Use proper hoses.

. Connect high pressure hose screw connect (D) to washer

outlet (A). Screw clockwise to tighten.

4. Open water supply. Squeeze trigger on gun. Allow water to

run (without engine running) until water runs out of pressure

hose. Start engine and cycle trigger on gun until “crackling”

sound (air in lines) stops. Turn off water supply.

07-0

0-0