Ariens 30SB Manual De Usuario

13 

30SB, 36SB, 45SB 

Snow BEAST 

 

 

Snow BEAST  Snow Blower 

V8.10.25.12 

High Mark 

1.  Fill the engine with SAE 5W-30 engine oil.  Fill the engine with 1.2 to 1.5 quarts of oil.  Fill up to the full level mark on the dip 

stick.  Do not overfill. 
When checking oil, remove dipstick, wipe completely clean, insert dipstick into dipstick tube on the engine (do NOT screw 
dipstick down), remove dipstick and observe oil level (detail below). 
Keep oil level at the high run mark for longest engine life. 
 

 
 
 
 
 

 
 
 
 

2.  Check that the fuel filter is clean and fill the tank to the proper level leaving adequate space for fuel to expand when the engine 

is running at its operating temperature.  That level is about 0.75-1” below the top of the tank to ensure no gasoline leaks. 

DANGER: GASOLINE IS HIGHLY FLAMMABLE AND 
EXPLOSIVE. Do not add fuel while the engine is 
running or is hot. Keep open flames, sparks, and heat 
away from the fuel and store fuel in containers 
specifically designed for that purpose. ADD FUEL 
OUTDOORS ONLY.  IF THE FUEL IS SPILLED, DO NOT 
START THE ENGINE. Manually push the snow blower 
away from the spill and wipe up immediately. 

1.  Connect snow blower headlight wire plug to the headlight 

bulb. 

2.  Connect the headlight bezel to the control panel. 

 

A.  Tilt headlight assembly and align tabs on the top 

 

 

of the headlight bezel with the notches in the 

 

 

control panel.  Insert the notches into the panel. 

 

B.  Tilt headlight assembly down while gently  

 

 

squeezing the headlight bezel and push headlight 

 

 

into control panel. 

Check engine oil level before each use.  
Maintain oil level between run marks on the 
dipstick, and change oil according to the 
maintenance schedule to maximize product life. 

Low Mark