Murray 1737921 Manual De Usuario
32
ENGINE:
Brand
Briggs & Stratton
Model Series
Snow Series
Gross Torque*
14.50 T.P. @ 3060 rpm
Type
4-Cycle - OHV
Displacement
18.6 cu in. (305 cc)
Starting System
110V Electric, Recoil
Alternator
60W AC
Oil Capacity
20 oz (,59 liter)
Hydraulic Fluid
Mineral 5W30
Fuel Tank Volume
3.0 qts (2,8 liters)
Spark Plug Gap
0.030 in. (0.76 mm)
Resistor Spark Plug
481055
Long Life Platinium Spark Plug
5066
Ignition System
This spark plug ignition system complies with Canadian standard ICES-002.
AUGER/IMPELLER:
Clearing Width
29 in. (73,7 cm)
Intake Height
21 in. (53 cm)
Auger/Impeller Diameter
12 in. (30 cm)
Number of Impeller Blades
3
CHUTE:
Chute Deflector
Remote
Chute Rotation
190° (3.5 Turn)
DRIVE SYSTEM:
Drive Type
Friction Disc - Easy-Turn
TM
Traction Control
Drive Speeds
6 Forward Speeds, 2 Reverse
Tire Size
16 x 6.5 in. (41 x 16,5 cm)
Tire Inflation
14 psi (,96 bar)
Engine Power Rating Information
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross en-
gine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, car-
buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross en-
gine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, car-
buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
SPECIFICATIONS