Country Home Products A2090TEA Manual De Usuario

If you strike a foreign object (wood, stone, etc.) 
there is a safety shear bolt on the driving 
system. This shear bolt will break, eliminating 
any driving force to the auger. 

 WARNING:  Always disconnect the spark 

plug wire before servicing your machine. 

1.  To replace the shear bolt, stop the DR

®

 

™

 MOWER and remove the 

spark plug wire. 

2.  Remove the bolts (item 1), and remove the 

belt cover (item 2). 

3.  Make sure that there is no debris remaining 

in the shaft hole. 

4.  Align the pulley hole with the shaft hole 

(item 3) and install the new shear bolt and 
nut (item 4). Tighten securely. 

5.  Reinstall cover and bolts. 

 WARNING:  Always disconnect the spark 

plug wire before servicing your machine. 

Lubricate the drive chain with chain saw chain 
lubricant every 2 hours of operation and also 
after each use. 

Before storing the DR

®

 SNOW THROWER, 

certain precautions should be taken to protect it 
from deterioration. 

 WARNING:  Always disconnect the spark 

plug wire before servicing your machine. 

1.  Clean the DR

®

 SNOW THROWER 

thoroughly. 

2.  Make all the necessary repairs. 

3.  Repaint all parts from which paint has worn 

or peeled. 

4. Lubricate 

the 

DR

®

 SNOW THROWER as 

instructed under Lubrication. 

5.  When the DR

®

 SNOW THROWER is dry, 

lubricate all moving parts.  Apply Fluid 
Film

®

 or comparable lubricant liberally to 

all surfaces to protect against rust. 

6.  Store in a dry place.