Harbor Freight Tools 3552 Manual De Usuario

Page 2

SKU 03551 03552 

        

You will need the manual for the safety 

warnings and cautions, assembly instructions, 

operating procedures, maintenance 

procedures, trouble shooting, parts list, 

and diagram

inside of the front cover. Keep both this 

manual and your invoice in a safe, dry place 

for future reference.

Warning: When using electric tools, 

machines, or equipment, basic safety 

precautions should always be followed 

to reduce the risk of fire, electric 

shock, and personal injury. 

1. 

 Cluttered 

areas invite injuries.
obserVe WorK area conditions.

2. 

 

Do not use machines or power tools in 

damp, wet, or poorly lit locations. Don’t 

expose to rain. Keep work area well lit. 

Do not use electrically powered tools 

in the presence of flammable gases or 

liquids.
Keep children aWay.

3. 

 Children must 

never be allowed in the work area. Do 

not let them handle machines, tools, or 

extension cords.
store idle eQuipMent.

4. 

 When not 

in use, tools must be locked up in a dry 

location to inhibit rust. Always lock up 

tools and keep out of reach of children.
do not Force the tool.

5. 

 It will do 

the job better and more safely at the rate 

for which it was intended. Do not use 

inappropriate attachments in an attempt 

to exceed the tool’s capacities.
use the right tool For the Job. 

6. 

Do not attempt to force a small tool or 

attachment to do the work of a larger 

industrial tool. Do not use a tool for a 

purpose for which it was not intended.
dress properly.

7. 

 Do not wear loose 

clothing or jewelry as they can be caught 

in moving parts. Protective, electrically 

non-conductive clothes and non-skid 

footwear are recommended when 

working. Wear restrictive hair covering to 

contain long hair.
use eye and ear protection.

8. 

 

Always wear ANSI approved chemical 

splash goggles when working with 

chemicals. Always wear ANSI approved 

impact safety goggles at other times. 

Wear a full face shield if you are 

producing metal filings or wood chips. 

Wear an ANSI approved dust mask or 

respirator when working around metal, 

wood, and chemical dusts and mists.
do not abuse the poWer cord.

9. 

 

Do not yank it to disconnect it from the 

receptacle. Do not carry tools by the 

cord.
do not oVerreach.

10. 

 Keep proper 

footing and balance at all times. Do not 

reach over or across running machines.

Capacity

1/2 Ton

1 Ton

Maximum Height

4-1/2”

5-1/2”

Maximum Diameter

6-1/2”

8”

Largest Arbor

1”

1-1/8”

Ram Square

3/4”

1”

Height of Press

10”

13”

Base Dimensions

4” x 9-1/2”

5” x 11”

Leverage Ratio

20:1

20: 1