Grizzly H7772 Prospecto
MODEL H7772/H7773
STAINLESS STEEL
TABLE
INSTRUCTION SHEET
Model H7772.
Model H7773.
Assembling the table.
COPYRIGHT © NOVEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR7727 PRINTED IN CHINA
Assembly
Assemble the table as shown in the photos and
assembly drawing on this page. When installing
the table top onto the large legs, make sure the
leg buttons snap and lock into place.
assembly drawing on this page. When installing
the table top onto the large legs, make sure the
leg buttons snap and lock into place.
Cleaning
Use a mild detergent, baking soda, or a vinegar-
water solution to clean and sanitize your table.
Always wipe the table dry with a soft cloth after
cleaning.
water solution to clean and sanitize your table.
Always wipe the table dry with a soft cloth after
cleaning.
Care
•
Clean your table frequently to keep it sanitary
and looking nice.
and looking nice.
•
Avoid cleaners that contain chlorine.
•
Avoid using steel wool when scrubbing—
small fragments can break off and rust in the
table surface.
small fragments can break off and rust in the
table surface.
•
Avoid prolonged contact with foods contain-
ing a lot of citrus, salt, or acid. These may
leave a white stain that will require cleaning
with a ScotchBrite pad to renew the surface.
ing a lot of citrus, salt, or acid. These may
leave a white stain that will require cleaning
with a ScotchBrite pad to renew the surface.
•
Always scrub in the same direction as the
stainless steel polish lines in the surface.
stainless steel polish lines in the surface.
•
Avoid cutting directly on the table surface as
this will rapidly dull your knives and leave
small scratches in the table surface.
this will rapidly dull your knives and leave
small scratches in the table surface.
You MUST clean and sanitize food contact
surfaces before using this product. Failure
to follow this warning may lead to illness!