Black Box LE071A Manual De Usuario
9
CHAPTER 3: Installation
NOTE
Both ends of the T-
connector must be attached
to network cabling. If the
Adapter is at the end of a
network segment, the end of
the T-connector not attached
to the network must have a
50-ohm terminator installed.
connector must be attached
to network cabling. If the
Adapter is at the end of a
network segment, the end of
the T-connector not attached
to the network must have a
50-ohm terminator installed.
3.2.3 LE075A
For the Modular Parallel Adapter for
AUI, refer to Fig. 3-4.
For the Modular Parallel Adapter for
AUI, refer to Fig. 3-4.
After connecting the connector,
press the slide latch to the left to
lock the connector into place.
lock the connector into place.
Fig. 3-4. Connecting an AUI Cable to the Media Unit.
NOTE
For use with an external
power supply only. Not to be
used with the SPC!
power supply only. Not to be
used with the SPC!