Buffalo Tools GEN1850 Manual De Usuario

GEN1850   1850 Surge Watts Portable Generator  

 

10  

 

 

 

 

If this generator is being used for the first time, the following few steps are required to prepare it for operation: 

 

 

This generator requires engine oil to function. Engine oil is a major factor affecting engine performance and service life. When new from 
the package, this generator contains no oil in the engine crankcase. The correct quantity of oil is equal to the oil capacity of the engine crankcase 

and is 13.5 fluid oz (0.40 L) for this Model GEN1850 Portable Generator. Add the correct quantity of oil before operating this generator for the first 

time. When replenishing oil for subsequent use of this generator, always determine that this generator  

has the correct quantity of oil. 
 
Model GEN1850 Oil Capacity (fluid oz./L) 

13.5 / 0.4 

SAE10W-30 

 
To add oil: 
1. Confirm that this generator is on a level surface. 

2. Open the Oil Access Panel as illustrated in Figure 1. 

3. Using a funnel, add high detergent motor oil to fill the engine crankcase to the correct quantity as stated above. SAE10W-30 oil is recommended. 

When the engine crankcase is full, the oil level should reach the lower lip of the oil filling opening as illustrated in Figure 2. 

4. Replace the oil filler/dipstick cap and close the oil access panel.