Harbor Freight Tools 68526 Manual De Usuario

Item 68526 / 68529        

      Page 5

1. 

Before service, maintenance, or cleaning:
a. 

b. 

c. 

d. 

2.  Keep all safety guards in place and in 

proper working order.  Safety guards include 

muffler, air cleaner, mechanical guards, 

and heat shields, among other guards.

3.  Make sure the Engine Switch is in its “OFF” 

position before moving the Generator and 

before performing any service, maintenance, 

or cleaning procedures on the unit.

4.  Keep all electrical equipment clean and dry.  

Replace any wiring where the insulation is 

cracked, cut, abraded, or otherwise degraded.  

Replace terminals that are worn, discolored, or 

corroded.  Keep terminals clean and tight.

5. 

6.  Wear ANSI-approved safety goggles, heavy-duty 

work gloves, and dust mask/respirator during service.

7.  Maintain labels and nameplates on the 

equipment.  These carry important information.  

If unreadable or missing, contact Harbor 

Freight Tools for a replacement.

8.  Have the equipment serviced by a qualified repair 

person using only identical replacement parts.  

This will ensure that the safety of the equipment 

is maintained.  Do not attempt any service or 

maintenance procedures not explained in this 

manual or any procedures that you are uncertain 

about your ability to perform safely or correctly.

9.  Store equipment out of the reach of children.

10. Follow scheduled engine and 

equipment maintenance.

1.  Do not smoke, or allow sparks, flames, 

or other sources of ignition around the 

equipment, especially when refuelling.

2.  Do not refill the fuel tank while the 

engine is running or hot.

3. 

4.  Do not fill fuel tank to the top.  Leave a little 

room for the fuel to expand as needed.

5.  Refuel in a well-ventilated area only.

6.  Wipe up any spilled fuel and allow excess 

to evaporate before starting engine.