GE PT878GC Manual De Usuario

April 2004

Screen (cont).

The middle of the screen is the work area, which displays the 
measured parameters, numeric measurements, and both bar and 
line graphs. (When you enter a selection on the Main Menu 
discussed in Chapter 4, Programming Site Data, this area 
displays menu prompts.)  A line at the bottom of the area also 
displays error code messages, which are described in more detail 
in Chapter 10, Diagnostics and Troubleshooting.

The system tray, shown in Figure 2-6 on page 2-10, displays 
icons that indicate meter operations not otherwise shown. Table 
2-3 below lists the icons and their meanings.

The bottom of the screen displays the three feature key options: 
F1, F2 and F3. The feature keys have different functions, 
depending on the task you are performing.

IR Transfer

IR data transfer in progress.

Alert

Indicates the meter encoun-
tered an error in operation.

Log Running

Indicates a log is running 
(marks).

Log Pending

Indicates a log is pending (no 
marks).

Stopwatch

Calibration Gate Operation: 
Watch is stopped when the 
gate is closed, or runs when it 
is open. (See page 3-46.)

Snapshot
(To file)

Indicates that the Snapshot 
function has been activated, 
so users can take screen cap-
tures (see page 6-23).

(To Printer)