GE PT878GC Manual De Usuario

April 2004

3-18

Installing the Second Bracket (cont.)

The spacing should now appear similar to that shown in Figure
3-21 below.

Figure 3-21: The Installed CFG-PI Fixture,

with Calculated Spacing

Installing the Transducers

1. Check to be sure the second CFG-PI holder bracket is

correctly positioned.

2. Apply a bead of CPL-16 couplant 6 mm (0.25 in.) wide on

each transducer face. (See Figure 3-22 below.)

Figure 3-22: Couplant on Transducer Face