Guardian Technologies 005284 Manual De Usuario

  

21

See Figures 1.1 and 1.2, for the location of the air 
cleaner. Use the following procedures (Figure 4.6, 
7kW; Figure 4.8, 13/16kW):

1.  Lift the roof and remove the door.
2.  Turn the two screws counterclockwise to loosen.
3.  Remove the cover and air filter.
4.  Wipe away dust or debris from inside of the air 

box and around edges.

5.  Install the new air cleaner into the air box.
6.  Install the cover. Turn the two cover screws clock-

wise to tighten.

See the Service Schedule section for air cleaner main-
tenance. See the Specifications section for air filter 
replacement part number.

See Figure 1.2 for the location of the air cleaner. Use 
the following procedure (Figure 4.7):

1.  Lift the roof and remove the door.
2.  Turn the worm gear clamp screw counterclock-

wise to loosen.

3.  Pull the old filter off the divider panel hub.
4.  Wipe away dust or debris from the panel hub.
5.  Install the new air cleaner onto the hub.
6.  Turn the worm gear clamp screw clockwise to 

tighten.

7.  Replace door and roof.

‹

‹

Reset the spark plug(s) gap or replace the spark 
plug(s) as necessary. See the Service Schedule section 
for maintenance requirements.

1.  Clean the area around the base of the spark 

plug(s) to keep dirt and debris out of the engine. 

2.  Remove the spark plug(s) and check the condi-

tion. Replace the spark plug(s) if worn or if reuse 
is questionable. See the Service Schedule section 
for recommended inspection. Clean by scraping 
or washing using a wire brush and commercial 
solvent. Do not blast the spark plug(s) to clean.