Multiquip DCA-125USJ Manual De Usuario

Various output voltages can be obtained using the 

Terminal Lugs.. The voltages at the terminals are depen-
dent on the position of the 

Voltage Selector Switch and the

adjustment of the 

Voltage Regulator Control Knob.

Remember the voltage selector switch determines the 

of the output voltage. The voltage regulator (VR) allows the
user to increase or decrease the selected voltage.

1. Place the voltage selector switch in the 3Ø 240/139

position as shown in Figure 22.

2. Connect the load wires to the 

Output Terminal  Lugs as

shown in Figure 22.

3. Turn the voltage regulator knob (Figure 23) clockwise  to

increase voltage output, turn counterclockwise to
decrease voltage output.

1. Place the voltage selector switch in the 3Ø 240/139

position as shown in Figure 25.

Use this position for
3Ø-200 or 1Ø115V.

2. Connect the load wires to the 

Output Terminal Lugs as

shown in Figure 26.

3. Turn the voltage regulator knob (Figure 24) clockwise  to

increase voltage output, turn counterclockwise to
decrease voltage output.

To achieve a 3Ø 200V output
the voltage selector switch
must be in the 3Ø-240/139
position and the voltage
regulator must be adjusted to
200V.