Alesis 03D Manual De Usuario

Chapter 10—Bus Outs

The 03D features four bus outputs. Input channel, stereo input channel, and effects 
return signals can be routed to the four buses. Each bus out features four-band para-
metric EQ and a dynamics processor. Bus outs can be used individually or in stereo 
pairs. Bus signals are output via analog phone jacks. They can also be output via the 
YGDAI digital outputs.

Bus out signals are converted to analog using 
18-bit D/A converters, and then output via bal-
anced 1/4-inch phone jacks with a +4 dB nominal 
output level.

In addition to the analog bus outs, bus out signals can be output via the YGDAI digital 
outputs. See YGDAI Cards on page 223 for more information.

Signals from bus outs 1 and 2 can be sent to the REC OUT 
connectors. These are phono jacks with a –10 dBV nom-
inal output level. The bus out 1 signal is sent to the left 
REC OUT, and bus out 2 signal is sent to the right REC 
OUT. The REC OUT connectors can also be used to out-
put the stereo output signal. The REC OUT SOURCE 
SELECT switch is used to select the signal source.

Bus out signal levels can be metered on the Meter pages. See Metering on page 79 for 
more information.

Input channel, stereo input channel, and effects return signals can be routed to buses 1 
to 4. See Stereo Pan, Balance & Routing on page 59 for more information.