Alesis 03D Manual De Usuario
184
Chapter 16—Automix
03D—Owner’s Manual
Selecting Parameters for Recording
You can select parameters for automix recording and rerecording using the OVER-
WRITE switches on the Main page.
WRITE switches on the Main page.
1. Use the [AUTOMIX] button to locate the Main page.
2. Use the cursor buttons to select the OVERWRITE switches, and the
[ENTER] button to set them.
If you are using a mouse, simply click the OVERWRITE switches.
If you are using a mouse, simply click the OVERWRITE switches.
Parameters are selected for recording when the corresponding switch in highlighted.
The following table lists the parameters affected by the OVERWRITE switches.
Scene memory recalls, channel, EQ, effects, and dynamics library recalls, scene recall
safe channel settings are recorded regardless of the OVERWRITE switch settings.
safe channel settings are recorded regardless of the OVERWRITE switch settings.
The following parameters are not recorded in an automix: surround mode selection,
input attenuators (EQ page), Bus to ST pan and on/off, aux pair pan, and 3+2+1 sur-
round subwoofer trim. To change these parameters in an automix, store the desired set-
ting in a mix scene and use the automix to recall that scene. Input attenuator and aux
pair pan settings can also be stored in a channel program, which can be recalled by the
automix.
input attenuators (EQ page), Bus to ST pan and on/off, aux pair pan, and 3+2+1 sur-
round subwoofer trim. To change these parameters in an automix, store the desired set-
ting in a mix scene and use the automix to recall that scene. Input attenuator and aux
pair pan settings can also be stored in a channel program, which can be recalled by the
automix.
Switch
Parameters
FADER
Normal CH faders, CH AUX sends, & CH Effect sends
CH ON
Channel [ON] buttons
EQ
EQ
Pan
Pan, balance, surround pan