Alesis 03D Manual De Usuario
Automix Punch-In/Punch-Out
189
03D—Owner’s Manual
Automix Punch-In/Punch-Out
You can punch-in and punch-out-style recording to rerecord events in an automix. The
overwrite switches allow you to choose which events you want to rerecord.
overwrite switches allow you to choose which events you want to rerecord.
1. Use the [AUTOMIX] button to locate the Main page.
2. Use the cursor buttons to select the OVERWRITE switches, and the
[ENTER] button to set them.
If you are using a mouse, simply click the OVERWRITE switches.
If you are using a mouse, simply click the OVERWRITE switches.
See Recording an Automix on page 185 for information about the overwrite switches.
3. Use the cursor button to select the REC switch, and then press the
[ENTER] button.
If you are using a mouse, simply click the REC switch.
If you are using a mouse, simply click the REC switch.
The 03D engages Rec Ready mode and the REC switch flashes.
4. Start the external timecode source.
Automix recording starts and the REC switch stops flashing and appears highlighted.
Previously recorded events play back.
5. To punch-in, press the channel’s [SEL] button.
6. Make the required parameter changes.
7. To punch-out, press the channel’s [SEL] button again.
8. To stop the automix, stop the external timecode source, or use the auto-
mix STOP switch.
When the Undo function is enabled, a confirmation dialog box appears asking whether
you want to record or abort the recorded events.
When the Undo function is enabled, a confirmation dialog box appears asking whether
you want to record or abort the recorded events.
The rerecorded events are added to the current automix.
Punch-in recording can be started during playback by pressing the REC switch. Like-
wise, punch-in recording can be started while the 03D is in Rec Ready mode by pressing
the PLAY switch. In both cases, however, you must use the [SEL] buttons to select chan-
nels for automix recording.
wise, punch-in recording can be started while the 03D is in Rec Ready mode by pressing
the PLAY switch. In both cases, however, you must use the [SEL] buttons to select chan-
nels for automix recording.
You can revert to the previous automix, discarding the newly recorded data using the
undo function. See Undoing Automix Operations on page 200 for more information.
undo function. See Undoing Automix Operations on page 200 for more information.
Automix recording can be stopped using the ABORT switch. If automix recording is
aborted, the newly recorded data is discarded. If the Undo function is enabled, the
newly recorded data is copied to the undo buffer. You must press the ABORT switch
while recording is in progress. Pressing it when recording has already stopped will not
work. If memory is low and the undo buffer is disabled, you may not be able to abort
playback or recording. In this case, the ABORT switch appears gray.
aborted, the newly recorded data is discarded. If the Undo function is enabled, the
newly recorded data is copied to the undo buffer. You must press the ABORT switch
while recording is in progress. Pressing it when recording has already stopped will not
work. If memory is low and the undo buffer is disabled, you may not be able to abort
playback or recording. In this case, the ABORT switch appears gray.