Roland Piano Manual De Usuario
152
Editing Songs
Swapping Two Phrase Tracks or
Patterns (Exchange)
The phrase tracks or patterns will be exchanged in their entirety.
1.
Access the Song Edit screen, and then load the song you
2.
Press [8 (Track Edit)].
The Track Edit window appears.
3.
Press
or
to select “Exchange,” and then press [8
(Select)].
A message of “EXCHANGE: Select source point.” appears.
4.
Use [CURSOR] to move the cursor to the track or pattern
that you want to exchange, and press [8 (Select)] to specify
it.
A message of “EXCHANGE: Select destination point.” appears.
5.
Use [CURSOR] to move the cursor to the exchange-
destination track or pattern, and press [8 (Select)] to specify
it.
The Track Edit (Exchange) window appears.
fig.11-27_50
6.
Check the tracks that are to be exchanged. If you want to
change the settings, use [CURSOR] to move the cursor to
the desired parameter, and turn the VALUE dial or press
[INC]/[DEC] to correct the settings.
Track (Source Track)
Check/modify the phrase track or pattern that will be exchanged.
Value
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
→
Track (Destination Track)
Check/modify the exchange-destination track or pattern.
Value
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
7.
When you have finished making settings, press [8 (Execute)]
to execute the operation.
Adjusting the Song’s Playback Time
(Time Fit)
This function calculates the playback time of a song or allows you to
modify the tempo track data so that the song will play back in a
specified time.
modify the tempo track data so that the song will play back in a
specified time.
1.
Access the Song Edit screen, and then load the song you
2.
Press [8 (Track Edit)].
The Track Edit window appears.
3.
Press
or
to select “Time Fit,” and then press [8
(Select)].
A message of “TIME FIT: Select target point.” appears.
4.
Use [CURSOR] to move the cursor to the first measure for
which you want to measure/adjust the playback time.
5.
Hold down [SHIFT] and press
to move the cursor to the
last measure for which you want to measure/adjust the
playback time, and press [8 (Select)] to specify it.
The Track Edit (Time Fit) window appears.
fig.11-28_50
6.
Use [CURSOR] to move the cursor to the desired parameter,
and turn the VALUE dial or press [INC]/[DEC] to make the
setting. First check the region that is to be affected by the
operation, and correct it if necessary.
Measure, for (Edit Range)
Measure the playback time, or check/modify the range of measures
that are to be adjusted. If you set “for” to “ALL,” all measures will be
specified.
that are to be adjusted. If you set “for” to “ALL,” all measures will be
specified.
Time
The current playback time will be displayed at the right of “
←
”. Set
the playback time at the left of “
←
”. From left to right, the time
display indicates “hours: minutes: seconds.”
7.
When you have finished making settings, press [8 (Execute)]
to execute the operation.