Roland XV-5080. Manual De Usuario

117

Chapter 3 Selecting Output Jacks

Chap.3

Settings in General MIDI Mode

Signal (PART) Flow

fig.03-004.e

Parameters

The parameters related to Part output settings are shown
below.

GM Effects General page ([GM] - [F6
(Effects)] - [F1 (General)])

Sets the output destination and level for the selected Part, as
well as its send level with respect to the Chorus and Reverb.

Part Output Assign

Sets the output destination for each Part.

Available Settings:

A–D:

The Part is sent to the selected pair of OUTPUT A–D

jacks.

Part Dry Send Level

Range:

0–127

Sets the level of the signal to be sent to the OUTPUT jacks,
which is determined by Part Output Assign.

Part Chorus Send Level

Range:

0–127

Sets how much of the Tone is sent to the Chorus. Its final
output destination is determined by the Chorus output
setting.

Part Reverb Send Level

Range:

0–127

Sets how much of the Tone is sent to the Reverb. Its final
output destination is determined by the Reverb output
setting.

Chorus Output Assign

Range:

A–D

Selects the OUTPUT jacks to which the Chorus unit’s stereo
output is routed.

* As the internal effects processors are in stereo, settings for the

INDIVIDUAL OUTPUT jacks are unavailable.

CHO

Part

OUTPUT B

OUTPUT C

OUTPUT D

REV

Output Assign

Out (GM CHORUS)

Rev (GM CHORUS)

Out (GM REVERB)

OUTPUT A