Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Roland
  4. XV-5080.
  5. Manual De Usuario

Roland XV-5080. Manual De Usuario

Descargar
Página de 312
185
Chapter 7 Loading a Variety of Data
Chap.7
Connecting a CD-ROM Drive
fig.07-005.e
1. Turn off the power of the XV-5080 and any connected 
external devices.
2. Connect the XV-5080 and the CD-ROM drive with a SCSI 
cable (one equipped with a 25-pin D-sub type connector 
at the XV-5080 end).
3. Set the SCSI ID with the SCSI switch on the rear panel. 
Any number is acceptable, as long as each device has a 
different SCSI ID.
* For more on the CD-ROM drive SCSI ID settings, please refer 
to the owner’s manual for the device you are using.
The SCSI ID switch settings “8” and “9” cannot be used with 
the XV-5080.
4. Set the CD-ROM drive’s terminator to ON.
* For more on the CD-ROM drive terminator settings, please 
refer to the owner’s manual for the device you are using.
the Owner’s Manual.
With Sampler Libraries
1. Turn on the power to the CD-ROM drive and the XV-
5080.
2. Place the CD-ROM (sampler library) that you want to 
load in the CD-ROM drive.
3. Press [DISK].
The Disk Menu page will appear.
4. Press [F1 (Load)].
The Load page will appear.
fig.07-006.e_70
5. Press [F1 (Drive)].
The Drive window will appear.
fig.07-007.e_70
The SCSI ID and Volume Label of the connected SCSI device 
appear in the window.
6. Turn the VALUE dial to select the SCSI ID that was set 
when the CD-ROM drive was connected.
7. Press [F6 (OK)].
The CD-ROM’s contents are displayed.
* Items enclosed by <> indicate folders. Folders cannot be 
loaded.
* The types of folders displayed vary depending on the library 
being loaded. “Refer to “About the Sampler Library Folder 
Types (Indication)” (p. 187).
8. Turn the VALUE dial or press [
] or [
] to select the 
folder containing the file to be loaded.
9. Press [
], and the files available for loading will be 
displayed.
* Press [
] to move up one level in the hierarchy.
By pressing [F2 (View)], you can specify the category for files 
to be displayed.
fig.07-008.e_70
Turn the VALUE dial or press  [
] or [
] to select the 
category you want to load, and then press [F5 (On/Off)]. 
Press [F4 (All)] if you want to set markers in all files. Press 
this once more to remove all markers. And then press [F6 
(OK)] to finalize the category.
XV-5080
CD-ROM drive
SCSI
Cable
[F5 (Refresh)]
Pressing this button clears the XV-5080’s internal cache. 
When sharing a Zip Drive with another XV-5080 (or 
other device), be sure to press this button whenever 
loading data from the other device concurrently being 
used.