Roland DR-3 Manual De Usuario
49
Chapter 4 Controlling the Styles with a Foot Switch
Ch
ap
ter
ap
ter
4
Assigning Functions to the Foot Switch
You can assign functions other than starting and stopping
performances and switching verses to the foot switch.
performances and switching verses to the foot switch.
fig.04-01p
1.
Press the [EDIT] button.
2.
Press [
] to select a <SYSTEM>.
fig.04-02d
3.
Press [ENTER].
4.
Press [
] [
] to select a <FS1> or a <FS2>.
If you have two foot switches connected using the special cable
(PCS-31), select <FS1> when making settings for the foot switch
with the white ring, and <FS2> when making settings for the foot
switch connected using the plug with the red ring.
(PCS-31), select <FS1> when making settings for the foot switch
with the white ring, and <FS2> when making settings for the foot
switch connected using the plug with the red ring.
fig.04-03d
5.
Turn the VALUE dial to select the function to be assigned.
Refer to the following chart to see which functions can be
assigned.
Press [EXIT] a number of times to return to the previous screen.
assigned.
Press [EXIT] a number of times to return to the previous screen.
With the factory settings,
<FS1> is set to “INTRO/END”
and <FS2> is set to “VERSE,
LOOP.”
<FS1> is set to “INTRO/END”
and <FS2> is set to “VERSE,
LOOP.”