Roland FR-7 Manual De Usuario
Editing sounds | 2. TREBLE EDIT parameters
44
r
FR-7/FR-5 V-Accordion
• To insert a space before the currently selected char-
acter and push all subsequent characters one posi-
tion to the right, select the character that should fol-
low the space, then press and hold [UP]. Example: To
insert a space before the “s” in “Celeste” (creating the
name “Cele ste”), position the cursor on the “s” and
hold down [UP] for a while.
tion to the right, select the character that should fol-
low the space, then press and hold [UP]. Example: To
insert a space before the “s” in “Celeste” (creating the
name “Cele ste”), position the cursor on the “s” and
hold down [UP] for a while.
Note: If the name already contains 8 characters (“Bandoneo”),
the last character is erased (example: “Band one”).
the last character is erased (example: “Band one”).
• To delete the character indicated by the cursor and
move subsequent characters one position to the left,
select it (example: “Celeste”) and press and hold
[DOWN] (“Celete”).
select it (example: “Celeste”) and press and hold
[DOWN] (“Celete”).
(6) Press the [MENU÷WRITE] button to jump to the fol-
lowing page:
(7) Use the [DATA÷ENTER] knob or the [UP]/[DOWN]
buttons to select the Set that should contain your
changed version(s).
Change this setting only if you do not want to save
your settings to the current Set.
changed version(s).
Change this setting only if you do not want to save
your settings to the current Set.
(8) (Only for “Current”:)
Press the [DATA÷ENTER] knob to select “REGISTER”,
then turn it to select the number of the register
where you want to save your edited version (1~14).
then turn it to select the number of the register
where you want to save your edited version (1~14).
(9) Press the [MENU÷WRITE] button to save your
changes. The display briefly shows a confirmation:
(10) Press the [EXIT÷JUMP] button to return to the Main
page.
Note: See pages 38 and 40 for how to select and adjust the
parameters below.
parameters below.
This parameter allows you to do
two things that are impossible
with an acoustic accordion: you
can (a) transform the selected
register into a different instru-
ment and (b) assign different sounds to each footage
the register plays.
two things that are impossible
with an acoustic accordion: you
can (a) transform the selected
register into a different instru-
ment and (b) assign different sounds to each footage
the register plays.
Note: Each FOOT can be assigned one TYPE (combinations like
“16= Bandoneon, 16= TexMex, 16= Organetto” are impossible).
“16= Bandoneon, 16= TexMex, 16= Organetto” are impossible).
A register, as you may know, may contain several reeds
tuned to different pitches (“feet”), so that you hear the
16’, 8’ and 4’ reeds when you select it, for example. The
“Register” parameter below allows you to select the
tuned to different pitches (“feet”), so that you hear the
16’, 8’ and 4’ reeds when you select it, for example. The
“Register” parameter below allows you to select the
desired footage(s). Here, you specify how each reed
(that can be assigned to a register) should sound. This
allows for complex combinations like the following:
(that can be assigned to a register) should sound. This
allows for complex combinations like the following:
We’ll let you decide whether such a combination really
makes sense, but it is possible… For each of the 14 Tre-
ble registers, that is.
makes sense, but it is possible… For each of the 14 Tre-
ble registers, that is.
• If necessary, press the [DATA÷ENTER] knob to select
the “FOOT” parameter, then rotate the [DATA÷ENTER]
knob to select the reed you wish to assign another
sound to.
The options are: ALL, 16, 8, 8–, 8+, 4, 5-1/3, 2-2/3
knob to select the reed you wish to assign another
sound to.
The options are: ALL, 16, 8, 8–, 8+, 4, 5-1/3, 2-2/3
• Press the [DATA÷ENTER] knob to select the “TYPE”
parameter, then rotate the [DATA÷ENTER] knob to
select a type (“instrument”).
The TYPE options are: Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische, OldItaly,
TexMex, Trikitixa.
select a type (“instrument”).
The TYPE options are: Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische, OldItaly,
TexMex, Trikitixa.
To save time while changing the TYPE for one or sev-
eral reeds, you could proceed as follows: suppose all
reeds are currently set to the “wrong” TYPE and you
want to use 16’, 8’ and 4’ as “Bandoneon”. In that
case, set FOOT to “ALL” and TYPE to “Bandoneon”.
Next, use STATUS on the “Register” page to switch off
the reeds you do not need.
eral reeds, you could proceed as follows: suppose all
reeds are currently set to the “wrong” TYPE and you
want to use 16’, 8’ and 4’ as “Bandoneon”. In that
case, set FOOT to “ALL” and TYPE to “Bandoneon”.
Next, use STATUS on the “Register” page to switch off
the reeds you do not need.
Note: Whenever you select “ALL” and set a different reed type,
the “Valve Noise” setting is automatically adapted to the reed
type you select here. You may have to change it afterwards if
you wish to use a different noise type.
the “Valve Noise” setting is automatically adapted to the reed
type you select here. You may have to change it afterwards if
you wish to use a different noise type.
If you selected “Current”
<16> <8> <8–> <8+> <4> <5-1/3> <2-2/3>
Bandoneon
Classic
Cajun
F-Folk
Steierische
T
exMex
T
riktixa