Edirol R-4 Manual De Usuario

Getting ready to use the R-4

* After you’ve made connections correctly, you must turn on the power using the steps below. If you don’t follow the

correct order, you may cause malfunctions or damage your speakers.

* Due to a circuitry protection feature, this unit requires a few moments after power-up before it is ready for normal

operation.

* If you connect the AC adaptor when batteries are installed, the power will be supplied from the AC adaptor.

fig.adaptor.eps

Turning the power on

Connect the DC plug of the AC adaptor to the AC adaptor jack located on the left side panel of the R-4.

* Use only the included AC adaptor.

Plug the AC adaptor into an AC power outlet.

* To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to

avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the
illustration.

To turn the power on, press and hold the R-4’s

[POWER] switch

for about two seconds.

Wait until the main screen appears.

Turning the power off

From the main screen, press and hold the R-4’s

[POWER] switch

for about two seconds to turn the

power off.

* If you disconnect or reconnect the AC adaptor, the power will turn off even if batteries are installed. Please turn off

the power on the R-4 itself before you change between AC adaptor power and battery power.

Connecting the AC adaptor and turning the power on

R-4_e.book 24 ページ２００５年２月１０日　木曜日　午後３時３６分