Edirol R-4 Manual De Usuario
57
Effects setting
4: Enhancer
5: Comp&DeEsser
No.
Parameter
name
name
Range of values
Default
values
values
Explanation
1
SENSE
0–100
50
Adjusts the sensitivity of the enhanc-
er effect.
er effect.
2
MIX
0–100
50
Adjusts the amount of phase-shifted
sound that is to be mixed with the in-
put.
sound that is to be mixed with the in-
put.
3
LEVEL
0–120
100
Adjusts the overall volume.
No.
Parameter
name
name
Range of values
Default
values
values
Explanation
1
DE-ESSER
SW.
SW.
OFF, ON
ON
Turn this ON to reduce unpleasant
sibilance.
sibilance.
2
THRESHOLD
0–100
50
Specifies the volume (threshold lev-
el) at which the compressor will be-
gin to operate. Compression will be
applied to the input when it exceeds
this level. Lower threshold settings
mean that the compressor will be ap-
plied even at lower levels.
el) at which the compressor will be-
gin to operate. Compression will be
applied to the input when it exceeds
this level. Lower threshold settings
mean that the compressor will be ap-
plied even at lower levels.
3
RATIO
1.0:1, 1.2:1, 1.5:1, 2.0:1, 2.8:1,
4.0:1, 8.0:1, 16.0:1, Inf:1
4.0:1, 8.0:1, 16.0:1, Inf:1
4.0:1
Adjusts the ratio at which the sound
will be compressed when the input
exceeds the threshold level. Higher
ratios mean that the sound will be
compressed more strongly.
will be compressed when the input
exceeds the threshold level. Higher
ratios mean that the sound will be
compressed more strongly.
4
ATTACK
0.25–100ms
10ms
Adjusts the time over which the
amount of compression specified by
Ratio will be reached once compres-
sion is triggered by the input exceed-
ing the threshold level. Higher
settings of Attack mean that com-
pression will be applied more slow-
ly.
amount of compression specified by
Ratio will be reached once compres-
sion is triggered by the input exceed-
ing the threshold level. Higher
settings of Attack mean that com-
pression will be applied more slow-
ly.
5
RELEASE
50–5000ms
100ms
Adjusts the time over which com-
pression will be removed once the
input falls below the threshold level.
Higher settings of Release mean that
the sound will revert to its uncom-
pressed state more slowly.
pression will be removed once the
input falls below the threshold level.
Higher settings of Release mean that
the sound will revert to its uncom-
pressed state more slowly.
6
GAIN
-6.0dB–+18.0dB
(The value will change in
steps of 0.5dB)
(The value will change in
steps of 0.5dB)
0.0dB
Adjusts the gain following compres-
sion.
sion.
7
LEVEL
0–120
100
Adjusts the overall volume.
R-4_e.book 57 ページ 2005年2月10日 木曜日 午後3時36分