GE IC3645SR4U404N2 Manual De Usuario

INSTALLATION AND OPERATION MANUAL
IT/IP TRANSISTOR CONTROL

Page 67

January 2001

Section 7. DASH DISPLAYS

Section 7.1 Application

The SX family Standard and Interactive Dash Displays

allow the operator and maintenance personnel easy

access to truck operation information and real-time system

diagnostics of the controller, motor and various

accessories. Hourmeter readings, battery discharge

information, maintenance information and system status

codes are clearly displayed during startup and running

modes. Shielded cable connections are made to the Dash

Display by means of five (5) 22-gage wires to the “Y” Plug

of the traction and hydraulic pump controls.

Section 7.2 Standard Dash Displays

The GE Standard Dash Display is a four segment Light

Emitting Diode (LED) instrument that displays the GE LX, ZX,

and SX Status Codes, Hourmeter Readings, Battery

Discharge Indication, and Maintenance Required Code.

The four LED's above the symbols indicate the active

readout mode.

Section 7.3 Interactive Custom Dash Displays

The Interactive Custom Dash Display allows the operator to

select the best vehicle performance for changing factory

(task) conditions. There are four (4) “operator interaction

modes” that can be selected by depressing a push-button

on the dash display.

From the Dash Display, the operator may select any of four

pre-set interactive modes consisting of (4) Controlled

Acceleration levels, (4) Field Weakening Pick Up levels and

(4) Speed Limit levels.

These interactive modes are “pre-set” using the Handset

(Functions 48 - 63) or a personal computer (Functions 97 -

112). This feature allows the operator to select the best

vehicle performance for changing factory (task) conditions.

The Custom Dash Display incorporates all the features and

functions of the Standard Dash Display, in addition to the

following customer options:

•

= LED graphics to display Battery Discharge Indication

status.

•

= Various LED indicators for Maintenance Required Status

Codes. These can include options for traction, pump and

power steer motors, hourmeter, over-temperature, seat

belt, brake and other safety sensors.

•

= A push-button associated with the four segment LED that

displays Status Codes can be used to scroll the last 16

“Stored Status Codes” that shut down vehicle operation

with a PMT fault.

Connections
Connections are made to the Dash Display with five (5) 22-

gage wires to Plug "Y" of each control. Shielded cable is

required to eliminate signal interference.

Part Number

IC3645LXTDD

T=Traction Only
P=Traction & Pump

3=Round Face with four
display symbols

For Custom Dash Displays,
contact your vehicleOEM.

Reference
AMP#102241-3 Dash Display mating plug

AMP#1-87195-8 Dash Display mating pin

44A723596-G09 Dash Display plug kit

AMP#175965-2 "Y"

Plug

AMP#175180-1 "Y" Plug receptacle

GE Electric Vehicle
Motors & Controls

BATTER

PUSH

EVT100ZX