Edirol V-4 Manual De Usuario
15
Before you begin
15. Output fade dial (OUTPUT FADE) (see p. 25)
This dial is used to apply fade-to-white or fade-to-black to the final output. Turn the dial toward
WHITE to fade the final output to white. Turn the dial toward BLACK to fade the final output to
black.
WHITE to fade the final output to white. Turn the dial toward BLACK to fade the final output to
black.
16. Channel A input selector (INPUT SELECT) (see p. 23)
This button selects the image that will be input to channel A of the video mixer.
17. BPM control dial (BPM CONTROL)
This dial adjusts the BPM value. On the V-4, you can switch images or effects in synchronization
with the BPM.
with the BPM.
18. Memory dial (MEMORY) (see p. 22)
The V-4 can store eight different states of the panel (e.g., effect assignments). By turning this dial
you can select one of these eight panel states. You can store various effect patterns such as wipes,
and then turn this dial to select the desired pattern. However, number 1 is fixed (non-writeable) as
a factory setting. You can make user settings for numbers 2 through 8.
you can select one of these eight panel states. You can store various effect patterns such as wipes,
and then turn this dial to select the desired pattern. However, number 1 is fixed (non-writeable) as
a factory setting. You can make user settings for numbers 2 through 8.
19. Channel B input selector (INPUT SELECT) (see p. 23)
Selects the image that will be input to channel B of the video mixer.
20. Channel A effect buttons (EFFECTS)
These buttons apply effects to the image of video mixer channel A. With the factory settings, the
buttons are assigned (from top to bottom) the Strobe, Negative, Colorize, and Multi effects. You
may edit the settings to assign different effects if desired.
buttons are assigned (from top to bottom) the Strobe, Negative, Colorize, and Multi effects. You
may edit the settings to assign different effects if desired.
21. Channel A effect control dial (CONTROL)
This dial lets you smoothly control a parameter of an effect that is being applied to the image of
channel A. The dial will adjust an effect parameter of the effect button that is blinking.
channel A. The dial will adjust an effect parameter of the effect button that is blinking.
22. Channel A transformer button (TRANSFORMER) (see p. 23)
This button lets you switch between channel A and B without using the video fader. With the
factory settings, the switch to the channel A image will be instant. You can also change the settings
to make the change occur gradually if desired.
factory settings, the switch to the channel A image will be instant. You can also change the settings
to make the change occur gradually if desired.
23. Mix button (MIX) (see p. 24)
This button switches the function of the video fader to Mix. When you operate the video fader, you
will fade smoothly from the image selected for channel A to the image selected for channel B,
dissolving the two images. Press this button if you want to switch between channels A and B with
dissolve.
will fade smoothly from the image selected for channel A to the image selected for channel B,
dissolving the two images. Press this button if you want to switch between channels A and B with
dissolve.
24. Wipe button (WIPE) (see p. 24)
This button switches the function of the video fader to Wipe. Press this button if you want to switch
between channels A and B by wiping between them. If desired, you can change the settings to
assign an effect other than Wipe to this button.
between channels A and B by wiping between them. If desired, you can change the settings to
assign an effect other than Wipe to this button.
25. EFX button (EFX)
This button switches the function of the video fader to Special Wipe or Slide. Press this button if
you want to switch between channels A and B with Special Wipe or Slide. If desired, you can
change the settings to assign an effect other than Special Wipe or Slide to this button.
you want to switch between channels A and B with Special Wipe or Slide. If desired, you can
change the settings to assign an effect other than Special Wipe or Slide to this button.