Edirol SD-80 Manual De Usuario

Controlling the SD-80 via MIDI

Controlling the 

SD-80 via MIDI

■

GM2 mode and Native mode each have four sound sets (variations). You can use MIDI messages to 
switch between these sound sets.

In GM2 mode, you can switch the sound set by transmitting a 

.

Transmit the following system exclusive data:

fig.5-00_99

20H = Part 1
:
3FH = Part 32 

00H = Classical set

01H = Contemporary set
02H = Solo set
03H = Enhanced set

For details on the calculation 
method, refer to the section 

 

within 

 

(MIDIImp_E.pdf) on the included 
CD-ROM.

(pp) specifies the part you want to switch, and (nn) selects the sound set.

In Native mode, you can switch the sound set by transmitting a 

. The upper byte 

(MSB) of the MIDI bank number will switch the sound set.

:

CC#00 (MSB) = **

**:

The set will be switched according to the value you insert here (decimal)

80 (50H) = Special 1 set
81 (51H) = Special 2 set
96 (60H) = Classical set
97 (61H) = Contemporary set
98 (62H) = Solo set
99 (63H) = Enhanced set
87 (57H) = User set

After transmitting CC#00, transmit CC#32 (Variation) and PC# (Program Change) messages to switch the 
sound (

(1)

(1) Exclusive status
(2) ID (Roland : 41H)
(3) Device ID
(4) Model ID (SD-90 : 00H 48H)
(5) Command ID (Data set : 12H)
(6) Address
(7) Data
(8) Checksum
(9) End of Exclusive

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

MIDI Multitimbre Part

Inst Set

Part

GM2 Instrument

Set Select