Yamaha Bass Effects Processor Manual De Usuario
24
In Tune!
TUNE
0
PITCH:440Hz
E
0
:
00000
>|<
Raise Pitch
Lower Pitch
TUNE
0
PITCH:440Hz
00
:
000000
|
000000
Standard Pitch
Note Name
00000
>|
|
00
<
|
0
<
|
000
<
|<
000
>
00
|
00
>
000
|
0000
>
0
|
Tuner Mode
This mode is used for tuning your bass. In the Tuner Mode, the MAGICSTOMP functions
as a chromatic tuner.
as a chromatic tuner.
* The signal from the MAGICSTOMP’s OUTPUT jack and PHONES jack is muted when in the Tuner Mode (no
sound will be produced).
■ Using the tuner
1
Press and hold the ON/OFF switch until the tuner display (shown below) ap-
pears on the display.
pears on the display.
With your bass connected to the INPUT jack, use the display to tune your bass.
* The Tuner Mode is not available during the store operation.
2
If you want to use a standard pitch other than 440Hz, use the – or + switches.
The standard pitch can be set anywhere between 438Hz and 445Hz in the MAGICSTOMP.
3
Play the string you want to tune (play a single tone).
1. First, tune the bass until the name of the note you want to tune to appears on the display.
2. When the string’s pitch is low,
2. When the string’s pitch is low,
>
mark will be displayed and the – switch’s lamp will be lit.
When the string’s pitch is high,
<
mark will be displayed and the + switch’s lamp will be lit.
The string’s pitch is in tune when “
>|<
” appears in the display and the ON/OFF switch’s
lamp is lit.
4
Press the ON/OFF switch to return to the original display.