Tascam 2488neo Manual De Usuario

POWER switch 

11

Turn the 2488neo power ON and OFF. Follow shut 
down procedures before turning power OFF (see “Shut 
down” on page 13).

21  IN jack 

Connect the included power cord.

MIDI OUT jack 

31

Sends Program Change and Control Change, MMC 
commands, realtime messages (such as MTC), 
common messages and other MIDI messages to 
connected MIDI devices.

MIDI IN jack 

41

Receives Program Change and Control Change messag-
es, MMC commands and other MIDI commands and 
messages, from connected MIDI devices.

DIGITAL IN jack 

51

Use this jack to receive an S/PDIF digital audio signal, 
which can then be used as a pair of  channel inputs (see 
“Digital input assignment” on page 29).

DIGITAL OUT jack 

61

Outputs the stereo bus signal as an S/PDIF format digi-
tal audio signal.

MONITOR OUT (L, R) jacks 

71

Outputs the signal selected in the top panel monitor 
section through these standard balanced 1/4" jacks.

STEREO OUT (L, R) jacks 

81

Outputs stereo bus signal.

EFFECT SENDS (1, 2) jacks 

91

Output effect sends signals 1 and 2.

0

 

MIC/LINE (A–D) jacks 

Analog input jacks for inputs A–D. These balanced jacks 
accept both XLR connectors and standard 1/4" plugs.

q

 

MIC/LINE (E–H) jacks 

Analog input jacks for inputs E–H. These balanced 
jacks accept standard 1/4" plugs.

w

 

USB port 

Use this port to connect the 2488neo to a computer 
using USB to exchange files, including audio files and 
settings, with an attached computer.

1

2

3 4

5 6 7

8

9

0

q

w