Yamaha 01V96i Manual De Usuario
Input & Output Patching
43
01V96i—Reference Manual
Input
& Output
Patching
Input & Output
Patching
Patching
This chapter describes how to patch (assign) signal paths
within the 01V96i to its inputs, outputs, and slot channels
within the 01V96i to its inputs, outputs, and slot channels
Input Patching
Signals input at INPUT connectors 1–16, ADAT IN connec-
tor, 2TR IN DIGITAL connectors, and Slot I/O card are
patched to Input Channels for use.
tor, 2TR IN DIGITAL connectors, and Slot I/O card are
patched to Input Channels for use.
Patch example:
By default, the Input Channels are patched as follows:
You can change these patches, if you desire.
Input Patching
Follow the steps below to change the Input Patch.
1.
Press the DISPLAY ACCESS [PATCH] button
repeatedly until the Patch | In Patch page
appears.
repeatedly until the Patch | In Patch page
appears.
Inputs, ADAT IN channels, TO HOST USB channels, and
slot channels that are currently assigned to Input Chan-
nels are shown in the parameter boxes (
slot channels that are currently assigned to Input Chan-
nels are shown in the parameter boxes (
1
) below the
channel numbers. The parameter indicators are
explained below:
explained below:
2.
Move the cursor to an input patch parameter
you wish to change, then rotate the Parame-
ter wheel or press the [INC]/[DEC] buttons to
modify the patching.
you wish to change, then rotate the Parame-
ter wheel or press the [INC]/[DEC] buttons to
modify the patching.
The long name of the currently-selected channel is indi-
cated in the upper-right corner of the screen (
cated in the upper-right corner of the screen (
1
). Below
the channel name is the long name of the selected input
channel (
channel (
2
). (See page 28 for information on changing
channel names.)
Input Channels
Input connectors and Slot channels
1–16
INPUT connectors 1–16
17–24
ADAT IN Input Channels 1–8
25–32
Slot Channels 1–8
ST IN Channels
1–4
1–4
Internal Effects Processor 1–4 Outputs
1–2
1–2
Input Patching
INPUT connector 1
INPUT connector 2
INPUT connector 3
INPUT connector 4
INPUT connector 5
INPUT connector 6
INPUT connector 7
INPUT connector 8
Input Channel 1
Input Channel 2
Input Channel 3
Input Channel 4
Input Channel 5
Input Channel 6
Input Channel 7
Input Channel 8
Parameter value
Description
–
No assignment
AD1–AD16
INPUT connectors 1–16
ADAT1–ADAT8
ADAT IN Input Channels 1–8
SL-01–SL-16
Slot Channels 1–16
FX1-1 & FX1-2
Outputs 1 & 2 of Internal Effects
Processor 1
Processor 1
FX2-1 & FX2-2
Outputs 1 & 2 of Internal Effects
Processor 2
Processor 2
FX3-1 & FX3-2
Outputs 1 & 2 of Internal Effects
Processor 3
Processor 3
FX4-1 & FX4-2
Outputs 1 & 2 of Internal Effects
Processor 4
Processor 4
2TD-L & 2TD-R
2TR DIGITAL IN (L/R)
USB1–USB16
TO HOST USB port input channels
1–16
1–16
1
1
2
2