Roland VS-700R Manual De Usuario

 

Connecting Two VS-700R I/O Units

 

By connecting two VS-700R I/O units, you'll be able to take advantage of the audio input/output of the two units, 

have access to two synthesizers (Fantom VS), and be able to use two ARX expansion boards.

 

You will need a faster system if you connect two VS-700R I/O units.

 

If you use a second I/O unit, open the top cover (ARX slot) of the second unit and set its SETTING DIP switches as 

follows. Then turn the VS-700R’s power off, then on again.

 

fig.dsw2.eps

 

The audio/MIDI device names for the second I/O unit will be the same as for the first unit but with a “2” 

added to the port name.

 

921

 

* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the 

power on all devices before making any connections.

• Applications that do not support ASIO cannot be used

• The audio ports of the second unit cannot be selected if SONAR is set to the WDM/KS or MME driver 

mode.

Normal setting

Setting for the second VS-700R unit

VS-700R_e1.book 12 ページ ２０１０年６月１５日　火曜日　午後４時５９分