Solid State Logic Soundscape Mixer Manual De Usuario

 
 
 
 

Page 29 of 109 

 

 

 
When you select the Create tool and click in an empty mixer column slot in “Mixer Edit” mode, a 
menu appears, prompting you to create a new mixer column. If you have several units (SSL 
Soundscape cards) in your system, the menu will let you choose the unit that the mixer column 
will be created for. Several mixer column configurations are available, always including “built-in” 
input and output elements. The output element always has a mute button, and may have a fader, 
pan or balance control, peakmeter, and solo button). An EPP (Equal Power Panning) output can be 
selected for stereo and mono to stereo outputs. 
 
Various mixer column configurations are described next. 
 

 
For mono in ‐ mono out, the signal just flows through the mixer column, only affected by the user 
defined settings of the various mixer elements, which should be mono. 
 
For  stereo  in  ‐  stereo  out, the respective level of the left and right signals is controlled by the 
balance setting (available if there is a fader). Stereo mixer elements would be inserted in the signal 
path as required. 
 
For  mono  in  ‐  mono  to  stereo  out, the signal path through the mixer column is mono, and the 
signal is split into stereo at the pan control.