Stanton DJLab 1.1 Manual De Usuario

M.212 CONTROL OVERVIEW TOP PANEL

1. Channel Gain - Adjusts the pre-fader volume for cleaner sound.

Reduce the channel gain if you notice the level indicators flashing red.

2. Mic Input Gain - Adjusts microphone input level.

3. Mic EQ - The mic channel includes a two-band EQ with a range of

+10dB to -10dB.

4. Channel EQ - Adjusts the high, mid and low frequency levels of the

input channels for either making the treble or bass louder or to be used

as an effect.

5. Input Fader - Controls individual source levels (channels) in the mix.

6. Crossfader Curve - The CUT setting allows the use of the crossfader

for quick cut in and out when scratching and mixing. The FADE setting

is used for longer segues, typically when mixing between two

beat-matched sources.

7. Crossfader - Used to mix the sound from both channels.

8. Mic Input - Insert your ¼” microphone plug here.

9. Headphone Input - Insert your ¼” headphone plugs here.

10. Fader Start On/Off Switch - When the unit has been connected

to a CD player using a control cable, this becomes the On/Off

switch to automatically start and stop the CD player while using the

crossfader.

11. Level Indicators - The dual LED indicators are used to indicate

the master output level of the Right and Left channels.

12. Channel Cue / Cue Pan - Used to preview channel audio to

your headphones. Listen here before bringing up channel faders or

moving the crossfader.

13. Headphone Level - Adjusts cue volume.

14. Master Level - Controls the overall output level.

15. Input Toggle Switch - Selects which source will be active based

on what you have connected to the rear panel input section

(phono/line).