Behringer B1220DSP Manual De Usuario
5
EUROLIVE B1220DSP
1. Introduction
Thank you very much for expressing your confidence in
BEHRINGER products by purchasing the EUROLIVE B1220DSP.
The B1220DSP is a state-of-the-art digitally controlled PA
speaker system that will simply blow you away. Its bi-amped
600-Watt engine drives a high-efficiency 12" woofer for brutal
punch and a 1.75" titanium driver for high-end resolution. The
built-in mixer allows you to run the show without any extra
equipment. A powerful 24-bit DSP controls the crossover, a dual
compressor/limiter, phase and time corrections and even a noise
gate. The intelligent dynamic EQ makes sure your system
sounds perfect at any sound level.
+ Please read this manual to familiarize yourself with
+ Please read this manual to familiarize yourself with
the control elements of the unit and its functions. After
you have carefully read this manual, keep it for future
reference.
1.1 Before you get started
1.1.1 Shipment
Your B1220DSP was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
+ Damaged equipment should NEVER be sent directly
+ Damaged equipment should NEVER be sent directly
to us. Please inform the dealer from whom you
acquired the unit immediately as well as the transport-
ation company from which you took delivery. Otherwise,
all claims for replacement/repair may be rendered
invalid.
+ Please always use the original packaging to avoid
damage due to storage or shipping.
+ Never let unsupervised children play with the
B1220DSP or with its packaging.
+ Please dispose of all packaging materials in an
environmentally friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling.
To avoid overheating, do not place the B1220DSP on top of
power amps or near radiators, etc.
The mains connection is made using the enclosed power cord
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
+ Please make sure that all equipment is properly
+ Please make sure that all equipment is properly
grounded at all times. For your own safety, never
remove or disable the ground conductor of the unit or
of the AC power cord.
Important note concerning installation:
+ The sound quality may diminish within the range of
+ The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency
sources. Increase the distance between the transmitter
and the device and use shielded cables for all
connections.
1.1.3 Online registration
Please remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com and read
the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!
Thank you for your cooperation!
1. Introduction