Fostex LM16 Manual De Usuario
Model LM16 [Names and functions]
26
(5) [PHANTOM (1-8, 9-16)] switches
You can supply phantom power to the XLR
INPUT connectors in eight channel groups (1-8
and 9-16) using these switches.
INPUT connectors in eight channel groups (1-8
and 9-16) using these switches.
When the [PHANTOM] switch is set to ON, the
corresponding [PHANTOM] indicator on the
control panel is illuminated (See page 28 for
details).
corresponding [PHANTOM] indicator on the
control panel is illuminated (See page 28 for
details).
(6) [CONTROLLER] connector
Used to connect to the [TO CONTROLLER]
connector on the rear panel of the control unit
using the supplied (or a different) CAT-5 cable
(See page 13 for details).
connector on the rear panel of the control unit
using the supplied (or a different) CAT-5 cable
(See page 13 for details).
(7) [AUX SEND (1, 2, 3)] jacks
Each of these unbalanced phone jacks outputs
the corresponding AUX SEND buss signal at
-2dBu nominal level. You can connect to a stage
monitor, effects processor, etc (See page 16 for
details).
the corresponding AUX SEND buss signal at
-2dBu nominal level. You can connect to a stage
monitor, effects processor, etc (See page 16 for
details).
(8) [MIDI OUT] port
Used to connect to the MIDI IN port of an
external MIDI device.
external MIDI device.
From this port, MMC (MIDI Machine Control
command) is output (See page 40 for details).
command) is output (See page 40 for details).
(9) [EFF SEND] jack
This unbalanced phone jack outputs the
EFFECT buss signal at -2dBu nominal level.
EFFECT buss signal at -2dBu nominal level.
You can connect to the input jack of an effects
processor, etc (See page 16 for details).
processor, etc (See page 16 for details).
(10) [USB HOST] port
By connecting a FAT16 or FAT32 USB memory
stick to this port, you can also use the USB
memory stick when upgrading the version (See
page 37 for details).
stick to this port, you can also use the USB
memory stick when upgrading the version (See
page 37 for details).
(11) [GROUP OUT (1, 2, 3, 4)] connectors
These balanced phone jacks output the group
buss signals at +4dBu nominal level.
buss signals at +4dBu nominal level.
You can connect these jacks to input
connectors of an external mixer, etc (See page
16 for details).
connectors of an external mixer, etc (See page
16 for details).
(12) [ST MIX OUT (L, R)] jacks
These unbalanced RCA pin jacks output the
stereo L and R buss signals.
stereo L and R buss signals.
You can connect these jacks to an external
master recorder, etc (See page 16 for details).
master recorder, etc (See page 16 for details).
(13) [STEREO OUT (L, R)] connectors
These XLR balanced connectors output the
stereo L and R buss signals. You can connect
these connectors to a power amplifier for
driving main speakers on stage, etc (See page
16 for details).
stereo L and R buss signals. You can connect
these connectors to a power amplifier for
driving main speakers on stage, etc (See page
16 for details).