Alesis DM10 Manual De Usuario

 

 

This page contains information about the module's current 
operating systems and sound ROM. 

1.

 

Press UTILITY to enter the main Utility Menu. 

2.

 

Press SYS (F4) to access the Accompaniment settings.   

3.

 

Press O/S (F3) to access the operating system information 
page. 

4.

 

This page contains the version numbers of the module's 
current software: 

a.

 

Trig OS: The current version number of the trigger 
firmware. 

b.

 

Sound ROM: The current version number of the 
sound ROM – the library of sounds read by the 
module. 

c.

 

Sound OS: The current version number of the module's own firmware. 

 

This page contains information about the module's available 
memory and lets you enable or disable write protection. 

Note: There are no editable parameters on this page. 
 
1.

 

Press UTILITY to enter the main Utility Menu. 

2.

 

Press SYS (F4) to access the Accompaniment settings.   

3.

 

Press INIT (F2) or O/S (F3) to change the available F-
BUTTON tabs.  MEM (F4) will become available. 

4.

 

Press MEM (F4) to access the memory page. 

5.

 

This page contains two items: 

a.

 

Memory: The amount of currently available module memory. 

b.

 

WriteProt: Use the VALUE UP / DOWN buttons or VALUE DIAL to enable or disable write 
protection.  When set to "ON" (the default), you can make changes to the Kits, Instruments, 
Sequences, etc., but will not be able to store them.  When set to "OFF," you can store these 
settings. 

 

 
To update the module, follow these steps: 
 
1.

 

If you have not done so already, download the updater 
application from www.alesis.com/dm10prokit (under the 
"Docs & Downloads" tab.)  

2.

 

Connect the module's USB port to your computer with a 
standard USB cable. 

3.

 

Press and hold the module's REC button while turning it on.  
(Windows users: If you see a message that says Windows 
was unable to install a driver, ignore it.) 

4.

 

Open the DM10 Updater application. 

5.

 

Windows users: Select "USB Audio Device" (the DM10 
module) from the "MIDI Interface" dropdown menu. 

Mac users: The DM10 module will be automatically 
selected.  

6.

 

Drag the appropriate file onto the application, or click "File" then "Open" and select the file.  You can 
upload SysEx (.syx) files – such as sound ROM files or firmware files – in this fashion. 

 

 

 

Note: Since the release of this module, we may have released new firmware or sound ROM files.  To 
keep your module current, we recommend checking the "Docs & Downloads" tab of 
www.alesis.com/dm10prokit for available updates for your DM10 module.