iOptron IEQ45TM Manual De Usuario

 
 

25

This catalog contains 116 asteroids.  

It can store up to 60 used entered objects.  

Here you can go to a target by entering its R.A. and DEC numbers. 

 

This operation will match the telescope's current coordinates to Target Right Ascension and 

Declination. After slewing to an object, press MENU—then scroll to “Sync to Target” and press ENTER. 
Follow the screen to do the sync. Using this function will re-calibrate the computer to the selected object. 
Multiple syncs can be performed if needed. This operation is most useful to find a faint star or nebula near a 
bright star. 

“Sync to Target” will only work after “Select and Slew” is performed. You can change the slewing 

speed to make the centering procedure easier. Simply press a number (1 through 9) to change the speed. 
The default slew speed is 64X. 

“Sync to Target”  does the same thing as one star alignment except that you choose the object to 

“sync” to. “One star align” chooses the star/object for you.  

Reserved for future development. 

 

Refer to 4.3.1. 

Press MENU button, from the main menu, scroll down and select “Set Up Controller”. Press 

ENTER and select “Set Display and Beep”: 

 

 

 

Use arrow keys to adjust LCD display contrast, LCD backlight intensity, keypads backlight Intensity 

and turn the keep beep ON/OFF  

Set Up Time and Site 

Set Display and Beep 

Set Anti-backlash 

Meridian Treatment 

Set Eyepiece Light 

Heating Controller 

Upgrade R.A. and DEC 

Firmware Information