Craftsman 247.77011 Manual De Usuario

5

 This unit is shipped without gasoline or 

oil in the engine. After assembly, see OPERATION 
section of this manual for proper fuel and engine oil 
fill-up. 

NOTE:  Reference to right and left hand side of the
Yard Vacuum is observed from the operating
position. See Figure 1.

This Yard Vacuum has been completely assembled 
at the factory, except for the handle, bag, and blower 
chute. These parts are shipped loose in the carton. 
A pair of safety glasses and a 20-oz. bottle of engine 
oil are also included in the carton. See Figure 1. 

•

Cut the corners of the carton. 

•

Remove all loose parts.

•

Remove packing material.

•

Lift unit from the rear to discard packing material 
from under unit and roll unit out of carton.

•

Check carton thoroughly for any other loose 
parts.

•

Handle Assembly

•

Bag

•

Blower Chute

•

Safety Glasses (Not Shown)

•

A 20-oz. Bottle of Engine Oil
(may be located in bag)

•

Operator’s Manual

Before proceeding with assembly of your new Yard 
Vacuum, disconnect the spark plug wire from the 
spark plug and ground onto the retaining post on the 
engine. This will prevent accidental starting of the 
engine. See Figure 2.

•

Unfold the upper handle until it aligns with lower 
handle. Make sure the rope guide is on the right 
side of upper handle. See Figure 1.