Ryobi D46CK Manual De Usuario

− English

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Failure to heed this 
warning could result in serious personal injury.

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in  a  hazardous  condition  leading  to  possible  serious 
personal injury.

Do  not  connect  to  power  supply  until  assembly  is 
complete.  Failure  to  comply  could  result  in  accidental 
starting and possible serious personal injury.

This product has been shipped completely assembled.


  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.



  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.



  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.



  If  any  parts  are  damaged  or  missing,  please  call 

1-800-525-2579 for assistance.

Drill
Double Ended Bits ()
Operator’s Manual
Case

Do  not  allow  familiarity  with  this  product  to  make  you 
careless. Remember that a careless fraction of a second 
is sufficient to inflict serious injury.

Always wear safety goggles or safety glasses with side 
shields  when  operating  power  tools.  Failure  to  do  so 
could  result  in  objects  being  thrown  into  your  eyes 
resulting in possible serious injury.

Do  not  use  any  attachments  or  accessories  not 
recommended by the manufacturer of this product. The 
use  of  attachments  or  accessories  not  recommended 
can result in serious personal injury.

You may use this product for the purposes listed below:


  Drilling in all types of wood products (lumber, plywood, 

paneling, composition board, and hardwood)



  Drilling in ceramics, plastics, fiberglass, and laminates



  Drilling in metals



  Mixing paint

See Figure 2.
To turn the drill 

ON, depress the switch trigger. To turn it 

OFF, release the switch trigger.

The variable speed switch delivers higher speed and torque 
with  increased  trigger  pressure  and  lower  speed  with  
decreased trigger pressure.
NOTE: You might hear a whistling or ringing noise from the 
switch during use. Do not be concerned; this is a normal 
part of the switch function.
 

Fig. 2